Sharmin Akter1, Tahnin Bintay Kamal2, Mahmuda Khatun3, Md. Mahbubul Alam3, Md. Zobaidul Hossen4, and Rezaul Karim5*
1Textile Physics Division, Bangladesh Jute Research Institute, Dhaka, Bangladesh; 2Mechanical Processing Division, Bangladesh Jute Research Institute, Dhaka, Bangladesh; 3Product Development Division, Bangladesh Jute Research Institute, Dhaka, Bangladesh; 4Microbiology Department, Bangladesh Jute Research Institute, Dhaka, Bangladesh; and 5Dept. of Textile Engineering, Sonargaon University, Dhaka, Bangladesh.
*Correspondence: rezatex99@gmail.com
Powered by Froala Editor
ABSTRACT
In this research, the electrical resistance of needle-punched non-woven jute fabric at different input voltage was measured. Here, to determine the electrical resistance, a device named the digital impedance meter has been used. The specific resistance for the different gauge lengths of non-woven jute fabric has been observed to enhance the use of jute fabric for electrical purposes. It has been observed that the electrical resistance increased with the higher value of gauge length and decreased with the increase of input voltage.
Keywords: Needle-punched Non-woven, Voltage, Gauge length, Jute-fabric, and Specific resistance.
Citation: Akter S, Kamal TB, Khatun M, Alam MM, Hossen MZ, and Karim R. (2020). Influence of potential differential voltage on electric resistance of needle punched non-woven jute fabrics, Aust. J. Eng. Innov. Technol., 2(1), 1-6. https://doi.org/10.34104/ajeit.020.0106
Powered by Froala Editor
